Grizzly Home InspectionsNick Horton(720) 666-2459

What Does a Full Home Inspection Include?

What Does a Full Home Inspection Include?

A full home inspection is a visual, non-invasive assessment of a home's major systems and structure — roof, foundation, electrical, plumbing, HVAC, attic, and crawlspace — performed by an inspector who documents what's working, what's worn, and what needs attention in a written report.

I'm Nick Horton, founder of Grizzly Home Inspections, and I've spent enough time crawling under Colorado houses to know buyers want two things: the truth, and to actually understand their house once they own it. A full inspection here typically runs two to four hours depending on the size and age of the home. That gap matters most when you're comparing quotes, since a cheap inspection that skips the attic or crawlspace isn't actually cheaper once you've bought the house. Here's the thing worth knowing before you hire anyone: Colorado has no state licensing requirement for home inspectors, so what gets covered can vary a lot from one company to the next (Denver7 News).

A typical walkthrough in Aurora

Picture a 1990s split-level in Aurora. The buyer's agent unlocks the door, the buyer shows up with coffee, and the inspection starts at the roof and works down. The inspector pulls the electrical panel cover, tests outlets, runs the furnace and AC, checks the water heater, climbs into the attic, and gets into the crawlspace with a flashlight. Along the way, a few things get flagged: a hairline foundation crack that's cosmetic, a GFCI outlet in the bathroom that doesn't trip, and a furnace that's pushing 18 years old and worth budgeting for. None of it is dramatic. It's just information the buyer didn't have an hour earlier.

By the time the walkthrough wraps up, the water shutoff valve has a tag on it, the electrical panel has breakers labeled by room, and the buyer has watched the inspector film a short video explaining why that furnace age matters and what to expect from it in the next few years.

What systems get checked during a full inspection?

A full inspection in Colorado generally covers:

  • Roof covering, flashing, and visible roof penetrations
  • Foundation, framing, and structural components
  • Exterior cladding, grading, and drainage around the home
  • Electrical panel, wiring, and outlets
  • Plumbing supply and drain lines, water heater, and fixtures
  • Heating and cooling systems
  • Attic insulation and ventilation
  • Basement and crawlspace
  • Interior doors, windows, and visible finishes
  • Built-in appliances

A full inspection doesn't include things like sewer line condition, radon levels, or water quality unless those are added on — those require their own equipment and time, and I only recommend them when the house actually gives a reason to look. No upselling someone into testing they don't need.

Why do Grizzly's reports include videos and labeled shutoffs?

A written report full of technical terms doesn't help anybody if the buyer can't picture what's being described. That's why every Grizzly report includes short video clips shot right where the issue is, explaining what we're looking at in plain language instead of inspection jargon.

We also tag the main water shutoff, the gas shutoff, and label the electrical panel before we leave, so a new homeowner isn't standing in a flooded basement three months later trying to figure out where the water valve is. We leave the home exactly as we found it — same breakers flipped back, same cabinet doors closed.

Reports go out the same day, and every finding gets walked through with the client, finding by finding, so they leave knowing their house instead of just holding a PDF. Questions don't stop at closing either — clients can text us after move-in if something comes up.

Why does radon testing matter so much in Colorado?

Radon isn't part of a standard full inspection, but in Colorado it's worth bringing up every time. Radon is the second leading cause of lung cancer, and it's found at elevated levels in roughly one out of every two Colorado homes (Colorado Department of Public Health & Environment). Front Range counties — Denver, Jefferson, Douglas, Arapahoe, Boulder, Adams, Broomfield, and El Paso among them — sit in the EPA's highest radon zone, reflecting the region's uranium-bearing geology (EPA Map of Radon Zones).

County Share of radon tests above 4.0 pCi/L Source
Arapahoe 48.84% Arapahoe County Public Health
El Paso 39% Fox21 News, 2025
Pueblo 64% Fox21 News, 2025

The state recommends testing with a short-term continuous radon monitor during a real estate transaction, which is exactly how we run it (CDPHE).

What should buyers do with the inspection report before the deadline?

Colorado's standard real estate contract gives buyers a short window. The Inspection Objection Deadline usually falls 7 to 10 days from mutual execution, with the Inspection Resolution Deadline right behind it at 10 to 14 days (Colorado Contract Date and Deadline Guide). Miss it, and you waive your right to object to what the inspection turns up (Logo Real Estate). With Denver metro homes spending a median of 32 days on the market and sellers getting 98.45% of list price at closing (DMAR Market Trends Report, September 2026), buyers don't have time to sit on a report and figure it out alone.

That's the whole point of walking through findings in person and sending the report the same day — you need to know what matters before that clock runs out, not after. If you've got a closing date coming up anywhere from Fort Collins to Pueblo, you can book an inspection online or call or text me directly at (720) 666-2459.

Nick Horton

Nick Horton, Founder & Certified Professional Inspector

Nick Horton is the owner and founder of Grizzly Home Inspections in Centennial, Colorado. He worked for other home inspection companies before starting Grizzly, to build a company where questions are always welcome and honesty matters more than the next sale. He believes a good inspection neither scares people away from a house nor makes it sound perfect: it tells the truth, explains what was found, and gives people what they need to decide with confidence.

Common questions

What's the difference between a full home inspection and a quick walk-through?
A full home inspection is a systematic review of the roof, structure, electrical, plumbing, HVAC, attic, and crawlspace, documented in a written report. A casual walk-through with an agent isn't a substitute — it won't catch a failing water heater, an undersized electrical panel, or moisture in a crawlspace the way a full inspection will.
Does a full home inspection include radon testing?
No, radon testing is a separate add-on, not part of a standard full inspection. It's worth considering in Colorado specifically, since the state has elevated radon levels in roughly half of its homes according to CDPHE, and testing uses a continuous radon monitor placed during the inspection window.
How long does a full home inspection take in Colorado?
Most full inspections take two to four hours, depending on the size, age, and condition of the home. Larger or older homes with more systems to check, or features like a crawlspace or detached garage, can run longer.
Do I need to be at the house during the inspection?
You don't have to be, but it helps. Being there lets you see issues firsthand, ask questions on the spot, and learn where the water shutoff and electrical panel are located instead of just reading about them later in the report.
What happens if the inspection finds a problem before the objection deadline?
In Colorado, the standard contract gives buyers roughly 7 to 10 days from mutual execution to submit an Inspection Objection, with the Inspection Resolution Deadline a few days after that. Missing the deadline means waiving your right to object, so reviewing the report promptly with your agent matters.

Get in touch

By submitting, you agree to be contacted about our services. See our privacy policy for how your information is used.